DOCS - bespoke measurement of Tubes using non-contact tools with full feedback if required > Software description
The latest non-contact measurement technology for your Tube inspection
Non-contact probes (infrared or laser technology)
Tube clamps : the most adjustable in the market 2 sizes available:
Tube diameter: 0 to 20 mm
Tube diameter: 20 to 70 mm
Description:
Non contact laser and infrared probe
Springback
Advantages:
Non-contact measurement technology (infrared and laser).
Software under Windowsฎ NT, 2000 & XP.
Friendly and complete software
Measurement in X, Y, Z and L, R, A (Length, Rotation, angle)
Unique : perfect integration with G-Pad.
The G-Pad/G-Tube solution acts as a unique software so that for the first time geometric features and tubes can be measured together.
Reports :
Deviation displayed in labels in the CAD system
Statistic report SPC
Customizable Excelฎ reports
Graphical section reports
DOCS is the latest technology in non contact tube measurement:
An automatic tube bending machine adjustment is included, as well as springback calculation and customized interfaces to the most common pipe bending machines.
G-Tube reduces the time of bending machine setup and the cost of tube manufacturing.
Characteristics:
Creation of theoretical tubes (LRA or XYZ)
Measurement of bent tubes with generation of a control report.
Communication with one or several benders in order to automatically correct bending data. (option)
Functionalities:
Tube
Tube data export and import
XYZ or LRA theoretical tube creation
Unit choice: inch or millimetres
XYZ, LRA theoretical tube edition
Tolerances visualization and affectation to T1MPT2 and to XYZ
Tolerances affectation for inspection
Control on the actual measure (Measure in the bend setup)
Number of measurements to make an average
Over length and different diameter in extremities setup
Referential management (Plan Line Point, 3-2-1, Best Fit or hard points)
Symmetrical or mirror tube creation
Inspection/Measure
Measure a tube (compared to a theoretical one)
Spring Back management (straight tube measure,
)
Memory inspection: open a tube as measured
Results : standards, extended, 3D view, Excel
Statistic (SPC)
Measure with double or simple accuracy
Record a measured tube as a theoretical tube (model measure)
Management of CLRA corrections
Inspect a measured tube with the theoretical
Bender
Automatic correction of LRA
Management of bending parameters (speed,
)
Affect a picture to a bender
Communication with a bender (send and receive)
Automatic or manual system (user or administrator)
3D view (shaded or wire frame, zoom and rotation functions, labels)
Customized or not report printing via ซ Direct Print ป or Excel.
Arm management (connect, Reset, disconnect,
)
Advantages:
Languages available: French, English, German, Spanish, Italian, Portuguese, Czech, Russian, Japanese, Chinese, Swedish.
Easy and intuitive software: it doesnt require a good knowledge of metrology
Display of tubes via a powerful graphical view
Customized Excel report printing
Possibility to print results without Excel
Automatic mode to measure tubes in quick succession